Construction Laborers
Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris, and other waste materials. May assist other craft workers.
Also Known As:
Bituminous Asphalt Technician
Construction Laborer
Construction Worker
Drop Crew Laborer
Equipment Operator (EO)
Form Setter
Post Framer
Scaffolding Operator
Site Work Laborer
Toolman
Wages
Annual wages for Construction Laborers in United States
Job Outlook
Bright
New job opportunities are very likely in the future
United States
2034 Projected Employment
1,563,400
7% Change From 2024
Explore Construction Laborers video
Tasks you might complete in a day.
- Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
- Position, join, align, or seal structural components, such as concrete wall sections or pipes.
- Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
- Mix, pour, or spread concrete, using portable cement mixers.
- Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
- Tend machines that pump concrete, grout, cement, sand, plaster, or stucco through spray guns for application to ceilings or walls.
- Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
- Lubricate, clean, or repair machinery, equipment, or tools.
- Place, consolidate, or protect case-in-place concrete or masonry structures.
- Clean or prepare construction sites to eliminate possible hazards.
- Perform site activities required of green certified construction practices, such as implementing waste management procedures, identifying materials for reuse, or installing erosion or sedimentation control mechanisms.
- Read plans, instructions, or specifications to determine work activities.
- Mix ingredients to create compounds for covering or cleaning surfaces.
- Place, consolidate, or protect case-in-place concrete or masonry structures.
- Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
- Measure, mark, or record openings or distances to layout areas where construction work will be performed.
- Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
- Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
- Lubricate, clean, or repair machinery, equipment, or tools.
- Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
- Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.
- Operate jackhammers or drills to break up concrete or pavement.
- Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
- Measure, mark, or record openings or distances to layout areas where construction work will be performed.
- Raze buildings or salvage useful materials.
- Operate or maintain air monitoring or other sampling devices in confined or hazardous environments.
- Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
- Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
- Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
- Provide assistance to craft workers, such as carpenters, plasterers, or masons.
- Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
- Mix, pour, or spread concrete, using portable cement mixers.
- Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
- Position, join, align, or seal structural components, such as concrete wall sections or pipes.
- Mix, pour, or spread concrete, using portable cement mixers.
- Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.
- Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
- Control traffic passing near, in, or around work zones.
- Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
Subject areas you may need to master.
- Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
- Fine Arts - Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.
- Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
- Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
- Administrative - Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.
- Therapy and Counseling - Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.
- Public Safety and Security - Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
- Economics and Accounting - Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.
- Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
- Foreign Language - Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.
- Transportation - Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.
- Personnel and Human Resources - Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.
- Building and Construction - Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
- Sociology and Anthropology - Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.
- Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
- History and Archeology - Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.
- Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
- Medicine and Dentistry - Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.
- Biology - Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.
- Physics - Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.
- Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
- Sales and Marketing - Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.
- Psychology - Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.
- Communications and Media - Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.
- Law and Government - Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.
- Telecommunications - Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.
- Food Production - Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.
- Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
- Design - Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
- Geography - Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.
- Philosophy and Theology - Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.
- Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
- English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, and rules of composition and grammar.
Strengths you may need in this role.
- Instructing - Teaching people how to do something.
- Service Orientation - Looking for ways to help people.
- Complex Problem Solving - Noticing a problem and figuring out the best way to solve it.
- Repairing - Repairing machines or systems using the right tools.
- Science - Using scientific rules and strategies to solve problems.
- Active Listening - Listening to others, not interrupting, and asking good questions.
- Management of Material Resources - Managing equipment and materials.
- Equipment Maintenance - Planning and doing the basic maintenance on equipment.
- Programming - Writing computer programs.
- Quality Control Analysis - Testing how well a product or service works.
- Active Learning - Figuring out how to use new ideas or things.
- Operation and Control - Using equipment or systems.
- Systems Analysis - Figuring out how a system should work and how changes in the future will affect it.
- Management of Personnel Resources - Selecting and managing the best workers for a job.
- Negotiation - Bringing people together to solve differences.
- Critical Thinking - Thinking about the pros and cons of different ways to solve a problem.
- Persuasion - Talking people into changing their minds or their behavior.
- Installation - Installing equipment, machines, wiring, or computer programs.
- Social Perceptiveness - Understanding people's reactions.
- Operations Monitoring - Watching gauges, dials, or display screens to make sure a machine is working.
- Coordination - Changing what is done based on other people's actions.
- Management of Financial Resources - Making spending decisions and keeping track of what is spent.
- Mathematics - Using math to solve problems.
- Writing - Writing things for co-workers or customers.
- Equipment Selection - Deciding what kind of tools and equipment are needed to do a job.
- Troubleshooting - Figuring out what is causing equipment, machines, wiring, or computer programs to not work.
- Monitoring - Keeping track of how well people and/or groups are doing in order to make improvements.
- Systems Evaluation - Measuring how well a system is working and how to improve it.
- Time Management - Managing your time and the time of other people.
- Reading Comprehension - Reading work-related information.
- Speaking - Talking to others.
- Learning Strategies - Using the best training or teaching strategies for learning new things.
- Judgment and Decision Making - Thinking about the pros and cons of different options and picking the best one.
- Technology Design - Making equipment and technology useful for customers.
- Operations Analysis - Figuring out what a product or service needs to be able to do.
- Visualization - Imagining how something will look after it is moved around or changed.
- Flexibility of Closure - Seeing hidden patterns.
- Perceptual Speed - Quickly comparing groups of letters, numbers, pictures, or other things.
- Control Precision - Quickly changing the controls of a machine, car, truck or boat.
- Speed of Limb Movement - Quickly moving your arms and legs.
- Rate Control - Changing when and how fast you move based on how something else is moving.
- Night Vision - Seeing at night or under low light.
- Depth Perception - Deciding which thing is closer or farther away from you, or deciding how far away it is from you.
- Wrist-Finger Speed - Making fast, simple, repeated movements of your fingers, hands, and wrists.
- Mathematical Reasoning - Choosing the right type of math to solve a problem.
- Spatial Orientation - Knowing where things are around you.
- Memorization - Remembering words, numbers, pictures, or steps.
- Visual Color Discrimination - Noticing the difference between colors, including shades and brightness.
- Reaction Time - Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.
- Problem Sensitivity - Noticing when problems happen.
- Deductive Reasoning - Using rules to solve problems.
- Static Strength - Lifting, pushing, pulling, or carrying.
- Trunk Strength - Using your lower back and stomach.
- Gross Body Coordination - Moving your arms, legs, and mid-section together while your whole body is moving.
- Speech Clarity - Speaking clearly.
- Far Vision - Seeing details that are far away.
- Auditory Attention - Paying attention to one sound while there are other distracting sounds.
- Speed of Closure - Quickly knowing what you are looking at.
- Fluency of Ideas - Coming up with lots of ideas.
- Inductive Reasoning - Making general rules or coming up with answers from lots of detailed information.
- Oral Expression - Communicating by speaking.
- Response Orientation - Quickly deciding if you should move your hand, foot, or other body part.
- Multilimb Coordination - Using your arms and/or legs together while sitting, standing, or lying down.
- Explosive Strength - Jumping, sprinting, or throwing something.
- Stamina - Exercising for a long time without getting out of breath.
- Glare Sensitivity - Seeing something even if there is a glare or very bright light.
- Selective Attention - Paying attention to something without being distracted.
- Oral Comprehension - Listening and understanding what people say.
- Originality - Creating new and original ideas.
- Category Flexibility - Grouping things in different ways.
- Written Comprehension - Reading and understanding what is written.
- Information Ordering - Ordering or arranging things.
- Written Expression - Communicating by writing.
- Dynamic Flexibility - Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.
- Peripheral Vision - Seeing something to your side when your are looking ahead.
- Speech Recognition - Recognizing spoken words.
- Sound Localization - Noticing the direction that a sound came from.
- Gross Body Equilibrium - Keeping your balance or staying upright.
- Time Sharing - Doing two or more things at the same time.
- Arm-Hand Steadiness - Keeping your arm or hand steady.
- Dynamic Strength - Exercising for a long time without your muscles getting tired.
- Extent Flexibility - Bending, stretching, twisting, or reaching with your body, arms, and/or legs.
- Hearing Sensitivity - Telling the difference between sounds.
- Near Vision - Seeing details up close.
- Number Facility - Adding, subtracting, multiplying, or dividing.
- Manual Dexterity - Holding or moving items with your hands.
- Finger Dexterity - Putting together small parts with your fingers.
Average Education Attained
Highest level of education earned by people in this career.
Career Coaching
This is not WorldatWork. These are private coaching services.
You May Also Be Interested In
Content sourced from United States Department of Labor Employment and Training Administration ("DOLETA") and the Minnesota Department of Employment & Economic Development ("DEED")